POYESHYAR Co. Ltd.

Inspection Equipment Supplier
 

Adhesion Test

  
     
 

 
     
Elcometer 107 Cross Hatch Cutter

The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate. Due to is rugged construction this gauge is ideal for thin, thick or tough coatings on flat or curved surfaces. An ideal field or laboratory test.

• Low cost

• Robust design

• Easy to change cutters

• Large Non slip grip

• Ideal for thick or hard coatings

• Large selection of cutters, each with four cutting faces

The Elcometer 107 Cross Hatch Cutter is available in two versions.

• The Basic Kit comes complete with:

Robust handle, the cutter of your choice (1X6, 2X6, 3X6, 1.5X11, 1X11), Allen Key (wrench), presentation storage case and instructions (together with the Classification of Adhesion Test Results Chart)

• The Full Kit includes all that is supplied in the Basic Kit, and also includes:

An eye glass, brush, and adhesive tape (either ASTM or ISO tape), all in a plastic ABS carrying case.
 

Download Catalogue
 
Elcometer 108 Hydraulic Adhesion Testers

The Elcometer 108 is an extremely versatile hydraulic adhesion tester which will cope with many adhesion test requirements. Tests can be made on flat or curved (concave and convex) surfaces.

A reusable, stainless steel dolly is adhered to the coating's surface and the force required to push the dolly from the surface is applied using the handle. The value of the force applied is displayed either on a digital display or with an analogue dial. For areas susceptible to explosion (e.g. inflammable areas) the analogue version should be chosen.

The Elcometer 108 is the ideal gauge for coatings on Tanks, Pipelines, etc

• Hand-powered and portable

• Ideal for site work

• Reusable stainless steel dollies

• Complete kit and carrying case

 

Elcometer 108 Digital Adhesion Gauge Features include:

• Maximum Hold - displays the highest value reached.

• ±1% Reading Accuracy

• Backlight Display for dark areas

• Rubber protective casing

• Switchable Metric / Imperial Units

 

The Elcometer 108 can be used with curved dollies, making this the gauge for adhesion on pipelines, tanks, and other curved surfaces.

A wide range of curved dollies are available, each designed for a specific range of curvature. Convex (top illustration) and concave (bottom illustration) dollies are for use on external and internal curvatures respectively.
 

Download Catalogue
 
Elcometer 106 Pull off Adhesion Tester

The Elcometer 106 adhesion tester - easy to operate and fully portable, provides a numerical value for adhesion. Applications include: paint or plasma spray on bridge decking, coatings on steel, aluminum or concrete, etc.

 

• Comes in a carrying case - ideal for site tests

• Hand operated so you don't have to worry about a power supply!

 

The Elcometer 106 is available in 5 versions:

• 106/1 : 0 - 3.5 MPa (0 - 500 PSI)

• 106/2 : 0 - 7 MPa (0 - 1000 PSI)

• 106/3 : 0 - 15 MPa (0 - 2000 PSI)

• 106/4 : 0 - 22 MPa (0 - 3200 PSI)

• 106/5 : 0 - 0.2 MPa (0 - 30 PSI)

Download Catalogue

Elcometer 1542 Cross Hatch Adhesion Tester

 Elcometer 1540 Cross Cut Tester Elcometer 106/6 Coatings on Concrete Adhesion Tester
     
Elcometer 109 Tensile Adhesion Tester Elcometer 110 Pneumatic Adhesion Tester Elcometer 1910 PAThandy™ Adhesion Tester
     
Elcometer 1940 PAT™ GM01 Adhesion Tester 6.3kN Elcometer 1941 PAT™ GM04 Adhesion Testers 20 & 40kN Elcometer 1970 PFCV - Portable Field Calibration Verification Unit
 
     

 
[ Home ] [ Products ] [ News ] [ Links ] [ Contact Us ] [ Site Map ] [ Farsi ]

No 15 , Golshahr Blvd. Africa St. Tehran, Iran Tel: +98 21 2204 8765 Fax: +98 21 2205 6482