Site inspection requires a range
of portable testing equipment. In order to make these products easily available
and transportable, Elcometer have developed a range of Inspection Kits. All the
gauges are conveniently stored in one hard plastic protective carrying case and
are supplied with full operating instructions
Elcometer 456 Mk 3
Ferrous Standard Separate Probe Coating Thickness Gauge 456FSS+F1S
(0 - 1500΅m) including
ElcoMaster Software
Cross Hatch Adhesion
Gauge with Adhesive Tape
Elcometer Marine Inspection
Kits
The International Maritime
Organization (IMO) regulation for the Performance Standard for Protective
Coatings (PSPC) for Salt Water Ballast Tanks, resolutions MSC.215(82) and
MSC.216(82), effective from 1st July 2008 for new ship builds, brings with it a
number of challenges for the Marine Coatings Inspector.
The IMO regulation not only
stipulates a rigorous dry film thickness verification regime, but also requires
the inspection of surface profile and cleanliness, together with the recording
of temperature, relative humidity and dewpoint at each stage of the build
process.
Available in two versions,
Standard and Top, the Elcometer Marine Inspection Kits have been specifically
designed for this purpose and contain all the equipment required by the Marine
Coatings Inspector to test and monitor all the parameters stipulated in the new
IMO regulation.
Elcometer 128 Swedish
Standard (ISO 8501, SIS 055900)
Elcometer 144 Paint
Safe Marker Pens
Elcometer 138 Bresle
Conductivity Kit
Elcometer 142 ISO
8502-3 Dust Tape Test Kit
Elcometer 124
Thickness Gauge and Testex Tape
Elcometer 224 Digital
Surface Profile Gauge
Elcometer 319/2
Dewpoint Meter
Elcometer 3236
Hexagonal Wet Film
Elcometer 456 Ferrous
Top Coating Thickness Gauge with Ferrous Scale 1 2 Standard Probe
(456FTS+f12S)
