Ultrasonic Wall Thickness Gauges

T-GAGE IV

Very popular general purpose thickness meter used for routine applications on a variety of industrial materials measuring to first echo only.

Technical Specification

• Millimeters or inches selection.
• Measurement resolution 0.01mm.
• Measuring range 0.63mm to 500mm (transducer dependent).
• Simple 1 point or more accurate 2 point calibration.
• Variable velocity for different Materials.
• Selectable backlight (on/off/auto).
• Scan mode displays minimum thickness.

T-GAGE IV DL

Data Logger version of the T-Gage IV plus the following features:
 

• Stores 1000 thickness readings, 10 files of 100 readings.

• Includes file transfer software and cable for PC interface.

• Data Send Options, interfacing with PCs/ printers.
• Minimum thickness Alarm Mode.
• Differential Mode.
• RS232 Output.

T-GAGE IV MM / T-GAGE IV MM DL

The T-Gage IV MM has the same specification as the T-Gage IV + but also includes a Multi-Mode key to instantly toggle between measuring mode P-E (to 1st back echo) and E-E (through paint thickness) to ignore surface coatings.

• Measuring range 0.63-500 mm in P-E mode
• Measuring range 2.54-25.4 mm in E-E mode using a highly damped “Gamma” transducer.

T-Gage IV MM DL is Data Logger version of T-Gage IV MM.

MICROGAGE II

A simple to use hand-held precision thickness gauge where a high degree of measuring accuracy is required on thin walled components.

Technical Specification

• Measuring range 0.15 mm to 25.40 mm (6 thou to 1 inch)

• Measurement resolution 0.001mm (1 micron) or 0.0001 inch

• Hi/Lo Alarm Mode & Differential Mode

• Uses 2 x AA batteries for 150 hours operation.

BETAGAGE (A / B Scan)

A new low cost A/B-Scan verification thickness/corrosion gauge.

Technical Specification:

• Robust, compact & lightweight, 150 hours from 3 x AA cells
• Large 10mm high digits in standard view
• A-scan verification - viewing area 240 x 160 pixels
• Timed profiled B-Scan to display cross sectional area.
• Measures 0.63-254mm in I-E mode (1st echo) .
• 2.54-102mm in E-E mode (through paint).
• Hi/Lo tolerances with audible/visual alarms.
• Stability indicator, bar graph and visual cursors for reading confirmation.
• Material velocities can be recalled from in-built library
• Stores 64 user definable set-ups for calibrations.
• Alphanumeric storage for 12000 A-Scans with thickness readings
• Includes RS232 cable and Windows interface software.

• Alphagage

• B-Gage

• Microgage II/P

• Microgage VX

• Sonagage III

• Steelgage II